Application of the H-point standard addition method to the speciation of Fe(II) and Fe(III) with chromogenic mixed reagents

Simultaneous determination of Fe(II) and Fe(III) or selective determination of each oxidation state of iron in the presence of the other one by H-point standard addition method (HPSAM) is described. Mixed reagents of 1,10-phenanthroline and salicylic acid was used as a selective chromogenic system for speciation of Fe(II) and Fe(III). It was shown that with appropriate selection of wavelength pairs, both Fe(II) and Fe(III) can be considered as analyte. The results showed that Fe(II) and Fe(III) can be determined simultaneously with the concentration ratios of Fe(II) to Fe(III) varying from 10:1 to 1:20 in the mixed sample. The accuracy and precision of the method are all satisfactory.     

Net analyte signal-based simultaneous determination of ethanol and water by quartz crystal nanobalance sensor

Net analyte signal (NAS)-based method called HLA/GO was applied for the selectively determination of binary mixture of ethanol and water by quartz crystal nanobalance (QCN) sensor. A full factorial design was applied for the formation of calibration and prediction sets in the concentration ranges 5.5-22.2 μg mL⁻¹ for ethanol and 7.01-28.07 μg mL⁻¹ for water. An optimal time range was selected by procedure which was based on the calculation of the net analyte signal regression plot in any considered time window for each test sample. A moving window strategy was used for searching the region with maximum linearity of NAS regression plot (minimum error indicator) and minimum of PRESS value. On the base of obtained results, the differences on the adsorption profiles in the time range between 1 and 600 s were used to determine mixtures of both compounds by HLA/GO method. The calculation of the net analytical signal using HLA/GO method allows determination of several figures of merit like selectivity, sensitivity, analytical sensitivity and limit of detection, for each component. To check the ability of the proposed method in the selection of linear regions of adsorption profile, a test for detecting non-linear regions of adsorption profile data in the presence of methanol was also described. The results showed that the method was successfully applied for the determination of ethanol and water.     

Spectrophotometric study of complexation equilibria with H-point standard addition and H-point curve isolation methods

The use of H-point curve isolation (HPCIM) and H-point standard addition methods (HPSAM) for spectrophotometric studies of complex formation equilibria are proposed. One step complex formation, two successive stepwise and mononuclear complex formation systems, and competitive complexation systems are studied successfully by the proposed methods. HPCIM is used for extracting the spectrum of complex or sum of complex species and HPSAM is used for calculation of equilibrium concentrations of ligand for each sample. The outputs of these procedures are complete concentration profiles of equilibrium system, spectral profile of intermediate components, and good estimation of conditional formation constants. The reliability of the method is evaluated using model data. Spectrophotometric studies of murexide-calcium, dithizone-nickel, methyl thymol blue (MTB)-copper, and competition of murexide and sulfate ions for complexation with zinc, are used as experimental model systems with different complexation stoichiometries and spectral overlapping of involved components.     

Modification of the GV-MSA model in obtaining the activity and osmotic coefficients of aqueous electrolyte solutions

In this work a modified form of the Ghotbi–Vera Mean Spherical Approximation model (MGV-MSA) has been used to correlate the mean ionic activity coefficients (MIAC) for a number of symmetric and asymmetric aqueous electrolyte solutions at 25 °C. In the proposed model the hard sphere as well as the electrostatic contributions to the MIAC and the osmotic coefficient of the previously GV-MSA model has been modified. The results of the proposed model for the MIAC of the electrolyte solutions studied in this work are used to directly calculate the values of the osmotic coefficients without introducing any new adjustable parameter. In the MGV-MSA model the cation diameter as well as the relative permittivity of water depends on the electrolyte concentration. Having considered such dependency for both cation and relative permittivity for water in an electrolyte solution the modification of the GV-MSA has been made. It should be stated that in the MGV-MSA model the anion diameter in the solution similar to that in the GV-MSA model remains constant and independent of the electrolyte concentration. The results obtained from the proposed model have been favorably compared with those of the GV-MSA model. The results showed that the MGV-MSA model can more accurately correlate the MIAC of the single electrolyte solutions than those of the GV-MSA model. The same comparison has been observed in case of the osmotic coefficients for the electrolyte solutions studied in this work. It should be noted that in order to do an unequivocal comparison between the results obtained from the models used in this work the same minimization procedure and the same experimental data for the MIAC and the osmotic coefficients have been used. Also it should be mentioned that in the MGV-MSA model the conversion from the McMillan–Mayer (MM) framework to that of the Lewis–Randall (LR) has been performed. It has been concluded that such transformation can affect the results in particular at higher electrolyte concentrations.     

Simultaneous determination of Fe(II) and Fe(III) by kinetic spectrophotometric H-point standard addition method

The H-point standard addition method (HPSAM) for simultaneous determination of Fe(II) and Fe(III) is described. The method is based on the difference in the rate of complex formation of iron in two different oxidation states with Gallic acid (GA) at pH 5. Fe(II) and Fe(III) can be determined in the range of 0.02–4.50 μg ml⁻¹ and 0.05–5.00 μg ml⁻¹, respectively, with satisfactory accuracy and precision in the presence of other metal ions, which rapidly form complexes with GA under working conditions. The proposed method was successfully applied for simultaneous determination of Fe(II) and Fe(III) in several environmental and synthetic samples with different concentration ratios of Fe(II) and Fe(III).     

H-point standard addition method for simultaneous determination of Fe(II), Co(II) and Cu(II) in micellar media with simultaneous addition of three analytes

H-point standard addition method, HPSAM, with simultaneous addition of three analytes is proposed for the resolution of ternary mixtures. It is a modification of the previously described H-point standard addition method that permits the resolution of three species from a unique calibration set by making the simultaneous addition of the three analytes. The method calculates the analyte concentration from spectral data at two wavelengths where the two species selected as interferents present the same absorbance relationship. These wavelength pairs are easily found, and can be selected to give the most precise results. Diethyldithiocarbomate (DDC) in a cationic micellar solution of cetyltrimethylammonium bromide (CTAB) was used for determination of Fe(II), Co(II) and Cu(II) at pH 5.50. The results showed that simultaneous determination of Fe(II), Co(II) and Cu(II) could be preformed in the range of 0.0–6.0, 0.0–8.0 and 0.0–12.0 μg ml⁻¹, respectively. The proposed method was successfully applied to the simultaneous determination of Fe(II), Co(II) and Cu(II) in several synthetic mixtures containing different concentration of Fe(II), Co(II) and Cu(II).     

Steric selectivity in oxidations of diols

Oxidations of 2,2-disubstituted-1,4-butanediols by the combination of nickel(II) bromide and benzoyl peroxide and by trityl tetrafluoroborate produce β,β-disubstituted-γ-butyrolactones with exceptional selectivity.     

Rh(II)-Catalyzed Isomerizations of Cyclopropenes Evidence for Rh(II)-Complexed Vinylcarbene Intermediates

The thermocatalytic rearrangements of cyclopropenes 1-4 have been investigated in the presence of Rh(IT) perfiuorobutyrate. 1, 2, 3-Triphenylcyclopropene ( 1a ) undergoes rearrangement lo diphenylindene 5a or, with alkoxycyclopropene derivatives, to α, β-unsaturated ketone 6. Furan formation occurs with 2, 3-diphenylcyclo-propenecarboxylate 2, but the diethyl counterpart 3 rearranges to dienoate 8. 2-Alkylcyclopropenecarboxylates 4 afforded (E)-methylidenecyclopentane derivatives 9 as the only isolable product in yields of ca. 35 %. A mechanism involving regio- and stereospecific cyclopropene ring opening to a Rh-complexed vinylcarbene and insertion of the latter into the C? H bond to give 9 is proposed. An analogous mechanism should account for the rearrangement products of 1 to 3 .     

C-H activation in bithiazole ring with thallium(III) ion

Two novel organometallic complex of 2,2′-dimethyl-4,4′-bithiazole (dm4bt) ligand (L) with formula [Tl(dm4bt)₂(NO₃)(H₂O)] (1) and [Tl(dm4bt)₂(NO₃)(DMSO)] (2) have been synthesized and structurally characterized by elemental analysis, FT-IR, ¹H NMR spectra and X-ray crystallography. These complexes also display the first transoid conformation in bithiazole ligands in which C-H bond activation in bithiazole ring is observed with Tl(III) ion.     

Synthesis,Characterization, and Crystal Structure of Thallium(I) Complex containing Monodeprotonated 2,6‐Pyridinedicarboxylic Acid

The reaction of an ethanolic solution 2,6‐pyridinedicarboxylic acid ( 1 , LH₂) with TlNO₃ in the presence of triethylamine led to the coordination polymer [Tl(LH)]_n ( 2 ). The complex was characterized by elemental analysis, IR spectroscopy and single‐crystal X‐ray diffraction. Crystal data for 2 at –80 °C: monoclinic, space group I2/a, a = 696.1(1), b = 1190.6(2), c = 931.0(2) pm, β = 103.28(1)°, Z = 4, R₁ = 0.0256.